I assume this is a linux pc. Getting drivers under Windows is a pain. Bahia supply some that timeout and I am not clear whether there are current ones in existence

If there is the usb-eth module insmodded on balloon, you should see console messages at plug/unplug time.

Nick

> -----Original Message-----
> From: balloon-admin@balloonboard.org
> [mailto:balloon-admin@balloonboard.org]On Behalf Of Wookey
> Sent: 10 November 2004 21:35
> To: Glen VanMilligan
> Cc: Balloon
> Subject: [Balloon] Re: USB Networking
> 
> 
> +++ Glen VanMilligan [04-11-10 13:36 -0800]:
> > How can I tell if the USB is working on the balloon board.  I 
> made the USB 
> > cable as described on the USBNetworking page and have it 
> attached to the J7.  
> > My host (PC) detects a USB drive when it gets plugged into the 
> USB port, but 
> > doesn't detect the cable when the balloon board is plugged in.
> 
> Has your board got 5V supplied to it? The USB detection needs 5V to work.
> 
> Wookey
> -- 
> Aleph One Ltd, Bottisham, CAMBRIDGE, CB5 9BA, UK  Tel +44 (0) 1223 811679
> work: http://www.aleph1.co.uk/     play: http://www.chaos.org.uk/~wookey/
> 
> _______________________________________________
> Balloon mailing list
> Balloon@balloonboard.org
> http://balloonboard.org/mailman/listinfo/balloon
>