Forwarded due to being sent while list was down - see also more messages to come. -------- Original Message -------- Subject: Balloon 3 connector pinouts - change Date: Wed, 22 Jun 2005 16:10:34 +0100 From: Chris Jones To: balloon@balloonboard.org Following some off-line discussion, it seems that nobody was using the 15-way Molex LCD connectors on Balloon 2 except me, and I'm not going to miss them terribly. Therefore I've taken the opportunity to redefine the LCD connector as a 35-way FFC with all the LCD control signals and data bits present, as well as the touch screen signals from the codec. Since there are now several 35-way FFCs around I've tried to arrange the pins so that collateral damage from plugging the wrong thing into the wrong hole is minimal as long as the backlight supply is current-limited. The new pinout is at: http://www.solidlights.co.uk/balloon/balloon3_connector_pinouts.pdf as before. Chris -- Chris Jones - chris@martin-jones.com Martin-Jones Technology Ltd, makers of Solidlights 148 Catharine Street, Cambridge, CB1 3AR, UK Phone +44 (0) 1223 474968 Fax +44 (0) 870 112 3908 http://www.solidlights.co.uk/ -- Chris Jones - chris@martin-jones.com Martin-Jones Technology Ltd, makers of Solidlights 148 Catharine Street, Cambridge, CB1 3AR, UK Phone +44 (0) 1223 474968 Fax +44 (0) 870 112 3908 http://www.solidlights.co.uk/