Hi all,

I'm new to the list. I've been working with yaffs2 for
a while and have gotten to know it well. I'm a fan of
yaffs and like the way it stores information on the
flash. I have not experienced any functional problems
that were not the fault bad integration (me!).

I've got it working on a 2GB Samsung NAND flash. This
flash supports interleaved operation (two chip
selects) and cached programming (odd and even banks on
each chip). The host CPU is a 180MHz ARM9 that has a
dedicated smart media interface with HW ECC
calculation and DMA.

I started with MTD (Linux 2.6.13) but since have
bypassed the MTD layer all together and branched out
on my own page-oriented NAND driver framework. I
copied the yaffs_mtdif code to integrate my driver.

There are two big problems I am working on solving:

1. Mount time - by ripping out all the MTD code and
really optimizing the driver I've got the mount time
down to a minute. The time budget os 10s to cold-boot
the entire system. Uh-oh.

2. Taking advantage of the chips interleaving and
cached programming features. My throughput is about
1.5 MB/s but I really want to quadruple that or better
if possible.

What is the current thinking on these two issues?

Regards,
Kent Ryhorchuk.


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com