On Monday 30 October 2006 20:18, Johann Kok (JP) wrote:
> Hi,
> during yaffs init I get the message "delete of chunkId:" with 38
> different chunkID's.  Then after the init is done and without doing
> any yaffs operations I reset the CPU and I get the same 38 "delete of
> chunkId:" messages again.
>
> Isn't this a problem?  Shouldn't it only delete them once?
>
> regards
> Johann Kok

You don't say whether you're using yaffs2 or yaffs(1).

If you're using yaffs(1) then this is a problem because it would indicate that 
attempts to delete a chunk are not "sticking". That would indicate, most 
likely, some problem in your byte mapping in the nand driver.

If you're using yaffs2 then this is not a problem. Deletion in yaffs2 does not 
end up being a physical mark on the nand, but is on a run-time state. 
Therefore deletions will be perfomed like this until the block containing the 
chunk is erased.

-- CHarles