Hello All,

I'm using Balloon board 2.05g, with initial images (as were shipped):

Bootloader - Compaq OHH BootLoader, Rev 2-20-2 for Balloon [BIG_KERNEL] [MD5] [NAND] [YAFFS] [MONO]

Kernel - 2.4.19-rmk4-tcl2-b1-james

As I noticed that pre-installed configuration contains three partitions, one is for bootloader (on NOR chip) and two - boot and root on NAND chip.

The board itself has three NAND chips 64Mb each.

When kernel is loaded, it detects only one NAND device :

    Initialising Balloon NAND MTD devices.
    NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
    Creating 2 MTD partitions on "Samsung K9D1208V0M":
     000000-0x00100000 : "nand boot"
     Giving out device 1 to nand boot
    100000-0x02000000 : "nand root"
    Giving out device 2 to nand root
    catising of First Balloon NAND MTD was successful.
    No NAND device found!!!

The first question is whether the detected device is all three NAND chips, or a single chip. In case it is a single chip, why other two chips are not detected?

Thanks,

Gil Messerman