Rutger,

To get jffs2 working, we adapted code from Ronetix to port yaffs2 into eCOS.  We were able to get it more or less working, but it isn't stable at all, and we want to use the latest yaffs2 code also.  For sure we want to join stress testing your code on our ARM9 board.  Please provide the necessary code to do so.

Kind Regards,
Stijn Deroo.

---
Stijn Deroo
R&D Engineer
Televic Transport Systems
Mail: s(dot)deroo(at)televic(dot)com
http://www.televic.com
Televic NV / SA (main office)
Leo Bekaertlaan 1
B-8870 Izegem
Tel: +32 (0)51 303045
Fax: +32 (0)51 310670


-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Rutger Hofman
Sent: donderdag 23 oktober 2008 10:29
To: Deroo Stijn
Cc: yaffs@lists.aleph1.co.uk; ecos-discuss@ecos.sourceware.org
Subject: [ECOS] Re: [Yaffs] YAFFS2 in eCOS

[Forwarded from the YAFFS mailing list also to the eCos list]

Currently eCos has no real support for NAND flash. However, at this very
moment I am working on that -- it is the main part of my job right now.
Status: my pilot eCos NAND flash layer is working right now on my
BlackFin, including Bad Block Table, ECC, etc. But before I publish, I
need lots more stress testing.

I am also going to run YAFFS2 on this eCos NAND Flash layer. I just
started making an eCos wrapper for it.

If you would like to join me in stress testing, well, I welcome that.

Rutger Hofman
VU Amsterdam

Deroo Stijn wrote:
> Hi,
>
> Does someone have some documentation on how to integrate yaffs2 into the eCOS operating system?
> On the yaffs internet page, I found some documentation about yaffs1, but there isn't any doc describing yaffs2.
>
> Kind regards,
> Stijn Deroo
>
>
>
>
> ---
> Stijn Deroo
> R&D Engineer
> Televic Transport Systems
> http://www.televic.com
> Televic NV / SA (main office)
> Leo Bekaertlaan 1
> B-8870 Izegem
> Tel: +32 (0)51 303045
> Fax: +32 (0)51 310670
>
> _______________________________________________
> yaffs mailing list
> yaffs@lists.aleph1.co.uk
> http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss