You can specify the type of fs, either yaffs or yaffs2 or you can enable the YAFFS_AUTO_YAFFS2 #ifdef CONFIG_YAFFS_AUTO_YAFFS2 if (yaffsVersion == 1 && mtd->oobblock >= 2048) { T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs2\n")); yaffsVersion = 2; } /* Added NCB 26/5/2006 for completeness */ if (yaffsVersion == 2 && mtd->oobblock == 512) { T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs1\n")); yaffsVersion = 1; } #endif On 9/6/06, goog long wrote: > > Sorry for asking a silly question. I am totally new to yaffs. What change > do I need to be able to use yaffs2 in yaffs1 compatibility mode? It seems > like this is not a config option change. I searched back past messages and > could not find any that mentioned how to do it. > > Thanks, > Ceco > > > *Wookey * wrote: > > On 06-09-05 13:53 -0700, goog long wrote: > > > > Can you please provide more info on the NAND flash you're using? I > > suspect you've got 512b page size flash chip... > > > > > > It is Samsung NAND Flash component (K9K1216Q0C-D). This memory component > > has 512Mb/64MB of capacity that is architected as 32Mx16b. > > yep - that's a 512 byte (528 byte) chip. Nevertheless you should be > able to use yaffs2 on it (in yaffs1 compatibility mode). > > Wookey > -- > Aleph One Ltd, Bottisham, CAMBRIDGE, CB5 9BA, UK Tel +44 (0) 1223 811679 > work: http://www.aleph1.co.uk/ play: http://wookware.org/ > > _______________________________________________ > yaffs mailing list > yaffs@lists.aleph1.co.uk > http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs > > ------------------------------ > How low will we go? Check out Yahoo! Messenger's low PC-to-Phone call > rates. > > > > _______________________________________________ > yaffs mailing list > yaffs@lists.aleph1.co.uk > http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs > > >