Hi guys,
 
I just follow this command to mount yaffs img to a flash, but i just see lost+found directory. Can anyone see whats wrong with it? Thank you,
 

Setup environment
1 . Install mtd tools
sudo apt-get install mtd-utils
 
2. Install ˇ°gitˇ± tool for download 
sudo apt-get install git-core
 
3. Download newest yaffs2 filesystem code
sudo git clone git://www.aleph1.co.uk/yaffs2
 
Config yaffs2 filesystem
1. Generate yaffs.ko
cd xxx/yaffs2
cp ./ yportenv_multi.h ./yportenv.h
sudo make modules
These commands will generate yaffs2multi.ko 
 
2. Insmod needed ko files
sudo modprobe mtd
sudo modprobe mtdchar
sudo modprobe mtdblock
cd xxx/yaffs2
insmod ./yaffs2multi.ko
Then, use ˇ°cat /proc/filesystem ˇ°, you will see that ˇ°yaffs2ˇ± file system is listed in the supported filesystem.
 
3. Use nandsim to generate a simulated nand flash device
sudo modprobe nandsim first_id_byte=0x20 second_id_byte=0xa2 third_id_byte=0x00 fourth_id_byte=0x15 
 
Generate a yaffs2image using mkyaffs2image
1. Create rootfs
Create  ˇ°rootfsˇ± dir anywhere, and add bin/, etc/, lib/, root/, tmp/  subdirectory,  ˇ°hello.txtˇ± file.
2. Generate
xxx/mkyaffs2image xxx/rootfs rootfs.image
The rootfs.image is needed to write to nand flash.
 
Mount yaffs2 image to nand flash
1. Erase flash
sudo flash_eraseall /dev/mtd0
 
2. Write image to flash
nandwrite -a -o /dev/mtd0 rootfs.image
 
3. Mount
Create xxx/yaffs2_mount 
mount -t yaffs2 /dev/mtdblock0 xxx/yaffs2
cd xxx/yaffs2
You will see bin/, etc/, lib/, root/, tmp, and hello.txt, which are created when generating yaffs2 image file.