to Nick 
 
>what does /proc/yaffs say?
 
this is the output of my /proc/yaffs
 
# cat /proc/yaffs
YAFFS built:Oct  5 2004 10:04:10
$Id: yaffs_fs.c,v 1.32 2003/10/29 20:42:34 charles Exp $
$Id: yaffs_guts.c,v 1.34 2004/06/08 08:47:55 charles Exp $
 
Device yaffs
startBlock......... 1
endBlock........... 2174
chunkGroupBits..... 1
chunkGroupSize..... 2
nErasedBlocks...... 6
nTnodesCreated..... 0
nFreeTnodes........ 0
nObjectsCreated.... 100
nFreeObjects....... 97
nFreeChunks........ 192
nPageWrites........ 0
nPageReads......... 0
nBlockErasures..... 0
nGCCopies.......... 0
garbageCollections. 0
passiveGCs......... 0
nRetriedWrites..... 0
nRetireBlocks...... 0
eccFixed........... 0
eccUnfixed......... 0
tagsEccFixed....... 0
tagsEccUnfixed..... 6
cacheHits.......... 0
nDeletedFiles...... 0
nUnlinkedFiles..... 0
nBackgroudDeletions 0
useNANDECC......... 1
#
 
>How big is the mtd partition in the boot messages?
 
# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 04000000 00004000 "BON"
mtd1: 021fc000 00004000 "mtd"
 
 
    Thanks
 
 
 
-----Original Message-----
From: Nick Bane [mailto:nick@cecomputing.co.uk]
Sent: Tuesday, October 05, 2004 11:31 AM
To: Pesce Gianfranco; yaffs@stoneboat.aleph1.co.uk
Subject: RE: [Yaffs] I: yaffs - file system on ARM

Pesce
 
Could you use plain text? It makes replying much easier.
 
what does /proc/yaffs say?
If its all used it may be that it isn't all erased ot being accessed correctly.
How big is the mtd partition in the boot messages?
 
Nick
-----Original Message-----
From: yaffs-admin@stoneboat.aleph1.co.uk [mailto:yaffs-admin@stoneboat.aleph1.co.uk]On Behalf Of Pesce Gianfranco
Sent: 05 October 2004 10:01
To: 'yaffs@stoneboat.aleph1.co.uk'
Subject: [Yaffs] I: yaffs - file system on ARM


        Sorry , more informations

        I am using a NAND flash Samsung K9D1208V0M

 -----Messaggio originale-----
Da:     Pesce Gianfranco 
Inviato:        marted́ 5 ottobre 2004 10.56
A:      'yaffs@stoneboat.aleph1.co.uk'
Oggetto:        yaffs - file system on ARM




Hi ,

I am using an ARM machine with 2.4.18 kernel
I want to use yaffs , the file system is mounted , but when I try to do any operation , as mkdir or cp , I get the message

"cannot allocate memory" and the command df says 100% used for /dev/mtdblock/1

Any help will be appreciated


--------------------------------------------------------------
GENERALE ELETTRONICA e AUTOMAZIONE S.r.l.
Via Renata Bianchi 40 - 16152 GENOVA (ITALY)
Tel.: +39 010 65966.1
Fax: +39 010 65966.311
http://www.gea-automotive.com;
E-mail: mailbox@gea-automotive.com


Ing. Gianfranco Pesce
APPLICATION DEVELOPMENT DEPT.
Project Engineer
Tel. +39.010.659.66.507
E-mail: pesceg@gea-automotive.com
--------------------------------------------------------------