[Yaffs] YAFFS2 on Simulated NAND

Ross Stutterheim ross.sweng at gmail.com
Thu Apr 27 21:03:54 BST 2006


I'm attempting to get a YAFFS2 filesystem to work on a NAND that I am
simulating in QEMU using the NAND simulator code in the mainline kernel.

I can mount my simulated NAND device (via its MTD block device) without any
errors ($ mount -t yaffs2 /dev/mtdblock0 /mnt/yfs).  I can create files and
everything seems to be working well.  I can put debugging printk()s in the
source for nandsim.c and see that the write and read functions are in fact
getting called and returning successfully.  I also have MTD debugging tunred
on (level 3) and its output seems to looks okay to me.  Everything seems
fine.

However, when I unmount the filesystem and then mount it again, nothing
resides in the filesystem except lost+found.

This happens both when I:
  1.) Mount the filesystem without doing any kind of formatting to the
partition (simulated NAND) before mounting it, unmount, and then remount
  2.) When I run mkyaffs2 (modified version of mkyaffs for LP NANDs) with no
image to write and then mount the filesystem, umount, and remount

I am not shutting down the QEMU emulator between mounts, because everything
would obviously go away then (simulated NAND is in RAM).

Has anyone experienced this before and/or would be willing to offer
suggestions?

Thanks in advance,

Ross S.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.aleph1.co.uk/pipermail/yaffs/attachments/20060427/117e5905/attachment.html


More information about the yaffs mailing list