[Yaffs-archive] bad block problem

hi nick
thanks for the reply
i understood your suggestion but
i am using old mtd ie compiling with CONFIG_YAFFS_USE_OLD_MTD flag
so yaffs will call nand_write & nand_write_oob & not nand_write_ecc.
the difference b/w my kernel & baloon kernel is baloon is using new mtd
baloon has used USE_WRONGECC = -DCONFIG_YAFFS_ECC_WRONG_ORDER=1 flag & i
nave not
i fell this cannot be the problem.
the bad block problem comes in 2-3 boards in 100 boards

any suggestions

may be i will enable debug messages in s3c2410nand.c file & try to debug

Regards
sharath



>
> > Sharath
> >
> > I had exactly that problem a while back till I made sure that the ecc
> connectivity between yaffs and mtd was working right. Things like one mtd
> layer being passed an integer indicating which oob style to use and
another
> being passed a pointer into an array of oob defs. Both versions link fine
of
> course. There is also some potential for confusion with the yaffs and
smart
> media locations too.
> >
> > If it is *nearly* right then reads often seem ok but the block is marked
> as bad and when the data is moved a bad block marker stops reuse of the
> block. Erasing the bad block marks is bad as this also removes the
> manufacturer bad block marks and the mtd filters this out. For dev work I
> stomp on this filter and accept any bad consequences.
> >
> > See http://62.49.201.250/balloon/ for sample linux source trees with
yaffs
> integration - new 2.4.25-vrs2-tcl1 added recently.
> >
> > Nick
> >
> > ----- Original Message -----
> > From: "Skumar" <skumar@mistralsoftware.com>
> > To: "yaffs" <yaffs@toby-churchill.org>
> > Sent: Thursday, March 25, 2004 5:54 AM
> > Subject: bad block problem
> >
> >
> > > hin
> > > i am working on s3c2410 processor using yaffs above mtd on NAND flash.
> > > i am facing problem that sometimes the yaffs is marking all the blocks
> as
> > > bad & the yaffs partition becomes unusable.
> > > i want to know if someone has faced this problem before.
> > > i want to know whether to debug yaffs or mtd?
> > >
> > > Regards
> > > sharath
> > >
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> -------------
> > > This mailing list is hosted by Toby Churchill open software
> (www.toby-churchill.org).
> > > If mailing list membership is no longer wanted you can remove yourself
> from the list by
> > > sending an email to yaffs-request@toby-churchill.org with the text
> "unsubscribe"
> > > (without the quotes) as the subject.
> > >
> > >
> ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÓ?+&j)bz
>
b²Ø¬?<-yÖòN?ò?«r?¥-S^zÊ?·?«{ü0Ãûho/Ü?êÜ?)eþSàÿò?T¨¥Sx%SËfzfÞ®Èb¦+'¢Z'êðj{^w
> *.q©ëzj/{*.®Ç¥}úèsØ^-+-o+?Ø§©ÞT¨¥¶Os}ûÿ­ê®zËÿ¶?òýÈn­Èb-_è®
> "¶?az×±·û§²æìr¸>{ÿðSØhºÛaz«¨µëÿjËazË>ç-
> >
>
>



---------------------------------------------------------------------------------------
This mailing list is hosted by Toby Churchill open software (www.toby-churchill.org).
If mailing list membership is no longer wanted you can remove yourself from the list by
sending an email to yaffs-request@toby-churchill.org with the text "unsubscribe"
(without the quotes) as the subject.