RE: [Yaffs] use yaffs

Hi,
have you tried Bonnie instead of Bonnie++ ?

On your error, are pages 0x0001ffc0-0x0001ffc1 always the same over different tests or do they change?

You can find other usefull test&benchmarking sources on
http://www.acnc.com/benchmark.html

cu
Adamo


> -----Original Message-----
> From: yaffs-admin@stoneboat.aleph1.co.uk
> [mailto:yaffs-admin@stoneboat.aleph1.co.uk]On Behalf Of Lorenzo PARISI
> Sent: giovedì 7 ottobre 2004 15.15
> To: YAFFS mailing list
> Subject: [Yaffs] use yaffs
>
>
> Hi,
>
> I've a s3c2410 board and I mount on NAND yaffs fs, with this
> operation:
>
> mkyaffs /dev/mtdN
> mount -t yaffs /dev/mtdblockN /mnt/yaffs
>
> with N: number of device.
>
> Is it corretct?
>
> For benchmarking NAND, I use bonnie++. When I use bonnie++
> on NAND with YAFFS, it return this errors:
>
> can't putc() - disk full?
> nand_write_oob: Failed write verify, page 0x0001ffc0
> nand_write_oob: Failed write verify, page 0x0001ffc1
>
> But, when I'm writing on NAND I don't receive any errors.
> Why?
>
> Thanks.
>
> _______________________________________________
> yaffs mailing list
> yaffs@stoneboat.aleph1.co.uk
> http://stoneboat.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs
>