[Yaffs] [YAFFS2] About Using NAND emulator

<-- Warning: charset 'ks_c_5601-1987' is not supported -->

I can't mount yaffs2ram file system on linux-2.6.12-mm2?
?
I make device like below.?
?
mknod /dev/mtd0 c 90 0?
mknod /dev/mtd1 c 90 2?
?
but whent I try to mount a yaffs2ram file system. I get an error:?
?
[root@localhost 2.6.12]# mount -v -t yaffs2ram /dev/mtd0 /mnt/nand?
mount: /dev/mtd0 is not a block device?
?
So I make mtd0 to block device. like this:?
?
[root@localhost 2.6.12]# mknod /dev/mtd0 b 90 0?
?
and I try to mount again. But I get an error, too:?
?
[root@localhost 2.6.12]# mount -v -t yaffs2ram /dev/mtd0 /mnt/nand?
mount: /dev/mtd0 is not a valid block device?
?
How can I mount yaffs2ram file system????
?
I'm off to debug this, but any pointers as to what to look for would be greatly appreciated.?
?
Tae-hoon Lee