[Yaffs] Re: [金山毒霸识别此邮件为垃圾邮件]yaffs Digest, Vol 19, Issue 6

Hi Vitaly Wool

    Thanks a million for your help , I am lijie from chongqing City  China . 
    According to your advice I have  adjusted my NAND driver to make its OOB layout match YAFFS2 OOB layout. my nandflash  is : "NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) "
the following oob placements defined in /driver/mtd/nand/nand_base.c
 --------------------------------------------------------------------------
 /* Define default oob placement schemes for large and small page devices */
static struct nand_oobinfo nand_oob_8 = {
        .useecc = MTD_NANDECC_AUTOPLACE,
        .eccbytes = 3,
        .eccpos = {0, 1, 2},
        .oobfree = { {3, 2}, {6, 2} }
};

static struct nand_oobinfo nand_oob_16 = {
        .useecc = MTD_NANDECC_AUTOPLACE,
        .eccbytes = 6,
        .eccpos = {0, 1, 2, 3, 6, 7},
        .oobfree = { {8, 8} }
};

static struct nand_oobinfo nand_oob_64 = {
        .useecc = MTD_NANDECC_AUTOPLACE,
        .eccbytes = 24,
        .eccpos = {
                40, 41, 42, 43, 44, 45, 46, 47,
                48, 49, 50, 51, 52, 53, 54, 55,
                56, 57, 58, 59, 60, 61, 62, 63},
        .oobfree = { {2, 38} }
};
 --------------------------------------------------------------------------
 
 While oob placements definition in yaffs_mtdif.c 
 ========================================== 
 static struct nand_oobinfo yaffs_oobinfo = {
 .useecc = 1,
 .eccbytes = 6,
 .eccpos = {8, 9, 10, 13, 14, 15}
};
 
 ==========================================
 then i change the struct " nand_oobinfo nand_oob_16" into 
 static struct nand_oobinfo nand_oob_16 = {
        .useecc = MTD_NANDECC_AUTOPLACE, //equal to " 2 "
        .eccbytes = 6,
        .eccpos = {0, 1, 2, 3, 6, 7},
};
 
but the errors is the same as before.  Anyclues what
could be wrong ..
Any help will be highly appreciated.


 regards





howhowwork
2006-12-18



发件人： yaffs-request@lists.aleph1.co.uk
发送时间： 2006-12-13 20:01:35
收件人： yaffs@lists.aleph1.co.uk
抄送： 
主题： [金山毒霸识别此邮件为垃圾邮件]yaffs Digest, Vol 19, Issue 6

Send yaffs mailing list submissions to
yaffs@lists.aleph1.co.uk

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs
or, via email, send a message with subject or body 'help' to
yaffs-request@lists.aleph1.co.uk

You can reach the person managing the list at
yaffs-owner@lists.aleph1.co.uk

When replying, please edit your Subject line so it is more specific
than "Re: Contents of yaffs digest..."


Today's Topics:

   1. Re: yaffs compiling errors 'yaffs_internal_read_super' and
      yaffs2 write errors (Vitaly Wool)


----------------------------------------------------------------------

Message: 1
Date: Wed, 13 Dec 2006 12:31:02 +0300
From: "Vitaly Wool"  <vitalywool@gmail.com >
Subject: Re: [Yaffs] yaffs compiling errors
'yaffs_internal_read_super' and yaffs2 write errors
To: howhowwork  <howhowwork@163.com >
Cc: "yaffs@lists.aleph1.co.uk"  <yaffs@lists.aleph1.co.uk >
Message-ID:
<acd2a5930612130131n13c04182k503c4c4c08fffce1@mail.gmail.com >
Content-Type: text/plain; charset="iso-8859-1"

Hi,

On 12/13/06, howhowwork  <howhowwork@163.com > wrote:

>
> 4. then there are erros when copying  data to mnt's directory
>    the questions :
>  when copy less 120k data , no errors,and the data is correct after i
> reboot
>  however , copying more 100k data ,there are the following errors:
>  ===========================================
>  ** > >mtd ecc error unfixed on chunk 113984:0
>  ** > >mtd ecc error unfixed on chunk 113984:1
>  ** > >Block 3562 marked for retirement
>  ** > > yaffs chunk 114016 was not erased
>  ** > > Erasure failed 3563
>  ** > > Block 3563 retired
>