Hi Charles,
Thanks for your response.
As per your suggestion I tried with empty partition.
I mounted a partition as
mount -t yaffs2 /dev/mtdblock1 /mnt1
then created a file using "vi" and put some contents in it.
After this I save the file and then umount /mnt1
When I try to mount again I get messages as "Partially written block 1 being set for retirement"
When I looked in to the code I found that it is complaining because it thinks the block was retired in between. As I am new to yaffs2 I cannot understand what might be the issue.
Any help/pointers in this regard would be highly appreciated.
regards,
shivas
Charles Manning <
manningc2@actrix.gen.nz> wrote:
On Thursday 21 December 2006 09:38, Shiva Shankar wrote:
> Hi All,
>
> I am working on kernel 2.6.14.3. I could successfully include the YAFFS
> in to my kernel.
>
> I created a yaffs2.img file using the command
>
> "mkyaffs2image /my_dir yaffs2.img"
>
> after this I erased the flash using
> "flash_eraseall /dev/mtd1"
>
> After this I used nand write to write the yaffs2.img to /dev/mtd1
>
> nandwrite -a -p /dev/mtd1 /yaffs2.img
>
> after this I mount the flash partition
>
> mount -t yaffs2 /dev/mtdblock1 /mnt1
>
> and do a 'ls'
>
> ls /mnt1
> to see only lost+found
>
> I then create a file using vi and edit the file
>
> I do an "ls" i can see the file and its contents. I "umount" the
> partition and mount again I again see only lost + found
>
> If I do a nanddump I can see the contents of all the files that I had
> written!!!
>
> Can anyone give me some pointers I have reached a dead end.
the mkyaffsimage process does not work correctly at presents for yaffs2. This
is mainly due to the hassles trying to get the oob data to flow correctly
through the process.
I suggest you first try get going starting from an empty partition.
-- Charles
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com 
(text/plain)