Hello,
I am a beginner for yaffs ,too.. I am to use it on a 64M nand flash and it
is 512+16 type.
My OS is linux,kernel version is 2.6.30 .My question is how should I fix it
into my kernel and how should I make the image?
I've tried to patch it and configure it in many ways and make the image
using mkyaffsimg. But the result is disappointing. It just can execute
linuxrc(busybox).
On Wed, Feb 24, 2010 at 9:48 AM, Sven Van Asbroeck <
ab154365@yahoo.co.uk>wrote:
> > I intend to use YAFFS to a SD Card
> > file system.
>
> If you are planning to use an SD Card as a storage medium, you don't need
> yaffs. Using yaffs on an SD Card medium does not give you any benefits. If
> anything, it will wear out your SD Card faster.
>
> yaffs is a file system designed to run on top of raw flash. An SD Card is
> not raw flash. It contains a raw flash chip, true, but it also contains a
> microcontroller with firmware which will make the raw flash look like a
> standard disk (block device). This firmware is called a 'flash translation
> layer'.
>
> In short, if you want to use an SD Card as a storage medium, use a standard
> disk (block device) file system such as FAT.
>
> Sven
>
>
>
>
>
>
> _______________________________________________
> yaffs mailing list
> yaffs@lists.aleph1.co.uk
> http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs
>
(text/plain)