Dne Pá 30. července 2010 11:39:40 Wookey napsal(a):
> +++ Marek Vasut [2010-07-30 06:44 +0200]:
> > Dne Čt 29. července 2010 12:00:41 Wookey napsal(a):
> > > +++ Marek Vasut [2010-07-29 05:16 +0200]:
> > > > Add supported for PCF8574A GPIO expander and LEDs attached to it.
> > >
> > > This IO board is an add-on used in some ballon configurations, not
> > > part of the core board. There needs to be some way of selecting this
> > > support when the loon is used in this configuration. We have the
> > > balloon_has() macro which is used for dealing with the different
> > > builds of the board itself. Perhaps it should be extended to deal with
> > > add-on board functionality too?
> > >
> > > More obvious is using the CONFIG system to just enable this if
> > > CUED_IO_BOARD is configured.
> >
> > You can just disable the PCF driver if you want to save space. In case
> > you won't have the CUED board connected, the driver will just fail to
> > probe so it's ok I believe.
> >
> > The macro could be extended, but do we want such a weird stuff in kernel?
>
> That was how this list suggested we deal with the unprobe-able build
> variation, I beleive.
We have loadable kernel modules ever since ... long time ago. Maybe that's more
like the way to go.
>
> > (especially if the driver can simply fail to probe).
>
> No. Clearly anything that is probe-able should be probed. I thought
> thtat this wouldn't be as I2C devices are pretty dumb, but I guess we
> know its address here so we can try it and if no response then it's
> not there.
Yes, this one is probeable.
Cheers
>
> Wookey
(text/plain)