On 9/21/2012 8:02 AM, Ed Sutter wrote:
> On 9/20/2012 8:22 PM, Charles Manning wrote:
>> On Friday 21 September 2012 11:32:26 Charles Manning wrote:
>>> On Friday 21 September 2012 08:19:16 Ed Sutter wrote:
>>>> On 9/20/2012 1:18 PM, Ed Sutter wrote:
>>>>> On 9/17/2012 1:17 PM, Ed Sutter wrote:
>>>>>> Hi,
>>>>>> What is the status of building "yaffs direct"? Based on a different
>>>>>> thread
>>>>>> (http://www.aleph1.co.uk/lurker/message/20120614.203459.f1b2edbf.en.ht
>>>>>>
>>>>>> ml ), am
>>>>>> I correct to assume that this is under construction??
>>>>>>
>>>>>> I suppose I have two levels of non-standard complexity in my attempt
>>>>>> to do this...
>>>>>> First, I wanna build yaffs direct to run os-less.
>>>>>> Second I'd like to be able to build on Cygwin.
>>>>>>
>>>>>> I didn't find much text on this, so before I start building my own
>>>>>> makefile
>>>>>> I figured I'd ask if there is a documented procedure for doing this.
>>>>>>
>>>>>> Thanks,
>>>>>> Ed
>>>>> Following up on my own question...
>>>>> Does anyone have any experience with building yaffs-direct recently?
>>> I build it pretty much every day using Linux. I have built it in the
>>> past
>>> using cygwin, but not recently.
>>>
>>> I'll set up a Windows PC with Cygwin and give it a go today.
>>>
>> I just set up a new Win7 PC with Cygwin and built yaffs direct with a
>> few
>> minor issues.
>>
>> Here is what I did
>>
>> 1) Fetched the setup.exe from http://www.cygwin.com/.
>> 2) I first just ran it using defaults.
>> 3) I then added the gcc and gcc core packages by running setup.exe
>> and typing
>> gcc in the search box, then selecting those packages.
>> 4) Then ran setup.exe again to install make.
>> 5) Went to http://yaffs.net/download-yaffs-using-git and fetched a
>> tarball.
>> 6) Opened up a cygwin terminal and
>> 6a) untarred the tarball with
>> $ tar xvfz /cygdrive/c/User/charles/Downloads/yaffs....tar.gz\
>> 6b) cd to yaffs../direct
>> 6c) Ran the script there to copy through the yaffs core files
>> $ ./handle_common.sh copy
>> 6d) cd to basic-test
>> 6e) make
>>
>> At this point the make failed because the cygwin gcc I had installed
>> did not
>> like many of the -W options. I edited the Makefile to comment these out.
>>
>> make then ran fine and I got a program called directtest2k.exe which
>> ran fine.
>>
>> NB The step at 6b. In the Old Days this was not required since the same
>> sources were linked in. These days the core sources are run through a
>> simple
>> sed filter to modify a few names.
>>
>>
>> I hope that helps.
>>
>> -- Charles
> Hmmm...
>
> Ok, I wasn't aware of the need to run that script (is that documented
> anywhere?); so
> my first step was to just run 'make' under direct/basic-test. It
> tried to set up a bunch of
> links, but that failed because the path of the source file in the ln
> line was off by one directory
> level. That obviously raised a warning flag in my head, but I worked
> around it,
> and managed to get the basic-test directory built. But I had to fix
> compile time errors to do that...
>
> Taking a step back and following your instructions (but now I'm on a
> linux box just to eliminate
> one level of complexity), I ran the "./handle_common.sh copy" script,
> then cd'd to basic-test
> and run make and still get the same errors...
>
> 1. yaffs_fileem2k.c:426:12: warning: `nread' may be used uninitialized
> in this function
> 2. yaffsfs.c:1610:5: error: "CONFIG_YAFFS_WINCE" is not defined
> Also, note that those link attempts in the makefile are still off by
> one directory level.
>
> These are all easily fixed problems, but I wasn't thinking I would run
> into these kinds
> of issues so quickly. Is there more than one tarball? I'm using
> yaffs2-HEAD-34292b4.tar,
> which is what I got from
> http://aleph1.co.uk/gitweb?p=yaffs2.git;a=snapshot;h=HEAD;
>
> Ed
>
>
> _______________________________________________
> yaffs mailing list
> yaffs@lists.aleph1.co.uk
> http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs
Continuing down the path of "I don't think I have the right tarball", I
managed to get
the yaffs environment built to run on my embedded system. To start
simple, I figured I'd
just test using RAM, so I changed main() (in dtest.c) to do
yy_test("/ram1") instead of
yy_test("/yaffs2").
This failed with the following trace:
yaffs: yaffs: yaffs_guts_initialise()
yaffs: device function(s) missing or wrong
opendir failed
Free space in /ram1 is -1
It fails with the exact same error when I run directtest2k on linux.
After further investigation it appears that the ramdisk device (as it is
initialized in yaffs_start_up()) doesn't pass any of the tests in
yaffs_check_dev_fns(). Is something incorrect with the ramdisk
initialization
code in yaffs_start_up()?
Ed
PS..(still hoping there's a tarball mixup that will resolve all this)
(text/plain)