Thanks for suggestion. I will try it.
I am using the Samsung 16MB NAND flash . and separate 3 partitions.
/dev/mtd0 is used for kernel img; /dev/mtd1 for general file drive (YAFFS);
/dev/mtd2 for initrd.img. The yaffs driver is compiled by module. and set
"mount -t yaffs /dev/block1 /mnt/flash" in rcS (setup script). No format the
partition in the first mounting.
The drive is not always to use, it is just saved the config. file. So, I
dont clearly know why the yaffs is corrupt. I check the disk space by "du"
command. It said 100% used . And cannot remove any file in this /mnt/flash.
therefore , i think it is corrupted.
Any ideal??
Thank a lot.
Paul
----- Original Message -----
From: "Charles Manning" <
manningc2@actrix.gen.nz>
To: "Paul" <
paul@maypaul.com>; <
linux-mtd@lists.infradead.org>; "yaffs list"
<
yaffs@toby-churchill.org>
Sent: Friday, April 18, 2003 4:49 AM
Subject: Re: Restore the bad block flag in OOB of NAND flash
> On Friday 18 April 2003 05:21, Paul wrote:
> > Dear All,
> >
> > How can I restore the 0xFF in the OOB[5]? i understood the oob[5]
is
> > the bad block indicator. The YAFFS set accidentally the byte to 0x00 .
I
> > want to use JFFS2 but the eraseall command said they are invalid block.
I
> > am
> > sure that the block is health . So, I want to force set the oob[5] to
> > oxFF, pls. how can i do? Thank you.
> >
> > Paul
>
> Generally this is a bad idea to erase bad blocks since destroying factory
> marked bad blocks can cause problems through the entire chip (not just the
> bad block). eg. Some blocks are marked because a write to the block could
> disturb data in another block.
>
> More recent chips seem to have some hardware "fuse" blown to prevent bad
> blocks from being erased.
>
> One way to achieve what you want is to hack mkyaffs. mkyaffs erases the
> blocks in the partition, but first checks for bad block markers. If you
> comment out the check then it will erase the block regardless. This will
set
> all the bits in the block to 1 (including the bad block marker).
>
> BTW: I am curious as to how YAFFS managed to mark your block bad.
>
> -- Charles
>
>
>
> --------------------------------------------------------------------------
-------------
> This mailing list is hosted by Toby Churchill open software
(
www.toby-churchill.org).
> If mailing list membership is no longer wanted you can remove yourself
from the list by
> sending an email to yaffs-request@toby-churchill.org with the text
"unsubscribe"
> (without the quotes) as the subject.
>
>
---------------------------------------------------------------------------------------
This mailing list is hosted by Toby Churchill open software (
www.toby-churchill.org).
If mailing list membership is no longer wanted you can remove yourself from the list by
sending an email to
yaffs-request@toby-churchill.org with the text "unsubscribe"
(without the quotes) as the subject.
(text/plain)