[Balloon] Adding 5V uspply to 3.3V board

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: Wookey
Date:  
To: Balloon
Subject: [Balloon] Adding 5V uspply to 3.3V board
OK, I've got a supply of MAX 604 Chips.

Looking at the schematic suggests that I should just add one of these to
U22, and that U22 is right next to the Xilinx and the other MAX604 chip -
right?

However whilst this chip seems to be an option on it's own (here:
http://balloonboard.org/hardware/buildoptions.html ) it looks like I also
need to add a couple of links (R12 and R36) _or_ the MAX 894 switch for 5V
power to make it anywhere other than the 3V regulator - right?



Wookey
-- 
Aleph One Ltd, Bottisham, CAMBRIDGE, CB5 9BA, UK  Tel +44 (0) 1223 811679
work: http://www.aleph1.co.uk/     play: http://www.chaos.org.uk/~wookey/