Forwarded due to being sent while list was down - see also more messages
to come.
-------- Original Message --------
Subject: Balloon 3 connector pinouts - change
Date: Wed, 22 Jun 2005 16:10:34 +0100
From: Chris Jones <
chris@martin-jones.com>
To:
balloon@balloonboard.org
Following some off-line discussion, it seems that nobody was using the
15-way Molex LCD connectors on Balloon 2 except me, and I'm not going to
miss them terribly.
Therefore I've taken the opportunity to redefine the LCD connector as a
35-way FFC with all the LCD control signals and data bits present, as
well as the touch screen signals from the codec. Since there are now
several 35-way FFCs around I've tried to arrange the pins so that
collateral damage from plugging the wrong thing into the wrong hole is
minimal as long as the backlight supply is current-limited.
The new pinout is at:
http://www.solidlights.co.uk/balloon/balloon3_connector_pinouts.pdf
as before.
Chris
--
Chris Jones -
chris@martin-jones.com
Martin-Jones Technology Ltd, makers of Solidlights
148 Catharine Street, Cambridge, CB1 3AR, UK
Phone +44 (0) 1223 474968 Fax +44 (0) 870 112 3908
http://www.solidlights.co.uk/
--
Chris Jones -
chris@martin-jones.com
Martin-Jones Technology Ltd, makers of Solidlights
148 Catharine Street, Cambridge, CB1 3AR, UK
Phone +44 (0) 1223 474968 Fax +44 (0) 870 112 3908
http://www.solidlights.co.uk/
(text/plain)