Re: [Balloon] Balloon 3 E1 build progress

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: Paul Fidler
Date:  
To: Chris Jones
CC: balloon
Subject: Re: [Balloon] Balloon 3 E1 build progress
On Oct 6 2006, Chris Jones wrote:

>- However, there remains some kernel oddness. The test-v0.1 kernel from
>balloonboard.org grinds to a halt after initialising the serial ports
>(it really does stop, not just change baud rate!).


Does it stop just after printing out

pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART

or similar?

If so, I may have had the same problem on a P2 board when trying to use a
self-built kernel, but I put it down to me doing something silly/different.
(For example, I used the gcc 3.4 compiler, not gcc 3.3.) I gave up in the
end and went back to using a stock zImage.

This was with the current (94) and previous two revisions in husaberg SVN
if that's of any help.

Paul.


Paul Fidler
--
Cambridge University Engineering Department | Tel: +44 1223 332816
Trumpington Street, Cambridge, CB2 1PZ, UK | Fax: +44 1223 332662