On Oct 6 2006, Wookey wrote:
>On 2006-10-06 17:37 +0100, Laurie van Someren wrote:
>> Folks,
>> We want to mount an accessory board on top of a Balloon (2) board.
>
>Balloon 3, in fact, in case it matters. (It shouldn't)
We've used some M2 nylon nuts/screws from Farnell (part nos 7016920 and
7070494).
I have also used metal M2.5 standoffs with a Balloon3. You have to be very
careful. To protecte the board I used nylon washers (7047472) top and
bottom, some of which had to be carefully trimmed to fit around some of the
components on the board. This was for a single board. It's not really a
practical solution if you have several a lot of them.
Best wishes,
Paul.
Paul Fidler
--
Cambridge University Engineering Department | Tel: +44 1223 332816
Trumpington Street, Cambridge, CB2 1PZ, UK | Fax: +44 1223 332662
(text/plain)