Re: [Balloon] Build regression with 1098

+++ Charles Manning [2010-05-24 10:01 +1200]:
> r1062 was building but r1098 does not.... See below
> This is on a 32-bit Ubuntu 10.04 host in case that is relevant.
>
> Charles
>
> em_multistrap building armel multistrap on 'i386'

> E: Couldn't find package pcmciautils

Hmm. pcmciautils is not in grip lenny, but is necessary for the CF
slot to work on a double-sided balloon. We've put it in squeeze but
that doesn't help with the balloon plain build. It could go in via
updtes, but easier for now is just to get it from Debian so I've fixed
the multistrap.conf files in 1099:

The thing I don't get is why it's working OK here. I suspect it's down
to the behaviour of different multistrap versions and how smart they
are being about falling back. 1098 and 1099 work OK here, so I'm not
certain I've fixed it. If you stil have problems either fiddle with
the multistrap-balloon.conf file till it works or just remove the
pcmciautils mention and do without it. (You can always apt-get install
it later).

Index: multistrap-balloon.conf
===================================================================
--- multistrap-balloon.conf     (revision 1094)
+++ multistrap-balloon.conf    (working copy)
@@ -36,14 +36,14 @@
 suite=lenny

[Updates]
-packages=apt pcmciautils
+packages=apt
source=http://www.emdebian.org/grip
keyring=emdebian-archive-keyring
suite=lenny-proposed-updates

# fallback
[Debian]
-packages=
+packages=pcmciautils
source=http://ftp.uk.debian.org/debian
keyring=debian-archive-keyring
suite=lenny

Wookey
--
Principal hats: iEndian - Balloonboard - Toby Churchill - Emdebian
http://wookware.org/