[Balloon] Build regression with 1098

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: Charles Manning
Date:  
To: balloon
Subject: [Balloon] Build regression with 1098
r1062 was building but r1-98 does not.... See below
This is on a 32-bit Ubuntu 10.04 host in case that is relevant.

Charles



make[2]: Entering directory `/opt/balloon/trunk/rootfs/emdebian'
#Clean-up: in order to use fakeroot we have to clean out rootfs first 
mkdir -p ../../../build/rootfs/emdebian/sources/packages
(cd ../../../build/rootfs/emdebian && rm -rf emdebian-grip-rootfs) 
rm -f ../../../build/rootfs/emdebian/fakerootstate
# build rootfs with multistrap and then fix it up enough to boot it and do 
dpkg --configure -a;
# then unpack modules into rootfs and tar up the resulting whole.
# Fakeroot state is loaded/saved between invocations to preserve ownerships
`if [ -z $FAKEROOTKEY ]; then 
echo "fakeroot -i ../../../build/rootfs/emdebian/fakerootstate -s ../../../build/rootfs/emdebian/fakerootstate"; 
fi;` /usr/sbin/em_multistrap -a 
armel -d "../../../build/rootfs/emdebian/emdebian-grip-rootfs" -f "multistrap-balloon.conf" --tidy-up --source-dir ../../../build/rootfs/emdebian/sources/packages 
&& \
    `if [ -z $FAKEROOTKEY ]; then 
echo "fakeroot -i ../../../build/rootfs/emdebian/fakerootstate -s ../../../build/rootfs/emdebian/fakerootstate"; 
fi;` "./rootfs-config" "../../../build/rootfs/emdebian/emdebian-grip-rootfs" "files" 
&& \
    (cd ../../../build/rootfs/emdebian/emdebian-grip-rootfs && rm -rf 
lib/modules/ ) && \
    `if [ -z $FAKEROOTKEY ]; then 
echo "fakeroot -i ../../../build/rootfs/emdebian/fakerootstate -s ../../../build/rootfs/emdebian/fakerootstate"; 
fi;` 
tar -C ../../../build/rootfs/emdebian/emdebian-grip-rootfs --owner=root --group=root -xf ../../../build/kernel/modules.tgz  
&& \
    `if [ -z $FAKEROOTKEY ]; then 
echo "fakeroot -i ../../../build/rootfs/emdebian/fakerootstate -s ../../../build/rootfs/emdebian/fakerootstate"; 
fi;` 
tar -C ../../../build/rootfs/emdebian/emdebian-grip-rootfs -czf ../../../build/rootfs/emdebianrootstrap.tgz .
fakeroot: database file `../../../build/rootfs/emdebian/fakerootstate' does 
not exist.
em_multistrap 2.0.9 using multistrap-balloon.conf
Using foreign architecture: armel
em_multistrap building armel multistrap on 'i386'
INF: Setting ./lib64 -> ./lib symbolic link.
Getting package lists: apt-get  -o Apt::Architecture=armel -o 
Apt::Get::AllowUnauthenticated=true -o Apt::Get::Download-Only=true -o 
Apt::Install-Recommends=false -o 
Dir=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/ -o 
Dir::Etc=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/etc/apt/ -o 
Dir::Etc::SourceList=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/etc/apt/sources.list.d/multistrap.sources.list -o 
Dir::State=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/var/lib/apt/ -o 
Dir::State::Status=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/var/lib/dpkg/status -o 
Dir::Cache=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/var/cache/apt/ 
update
Get:1 http://www.emdebian.org lenny Release.gpg [197B]
Ign http://www.emdebian.org/grip/ lenny/main Translation-en_NZ
Get:2 http://www.emdebian.org lenny Release [21.1kB]
Ign http://www.emdebian.org lenny/main Packages
Ign http://www.emdebian.org lenny/main Sources
Ign http://www.emdebian.org lenny/main Packages
Ign http://www.emdebian.org lenny/main Sources
Get:3 http://www.emdebian.org lenny/main Packages [223kB]
Get:4 http://www.emdebian.org lenny/main Sources [249kB]
Fetched 494kB in 11s (43.5kB/s)                                                                                                                                                                                                             
Reading package lists... Done
W: Duplicate sources.list entry http://www.emdebian.org/grip/ lenny/main 
Packages 
(/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/var/lib/apt/lists/www.emdebian.org_grip_dists_lenny_main_binary-armel_Packages)
W: You may want to run apt-get update to correct these problems
apt-get -y  -o Apt::Architecture=armel -o 
Apt::Get::AllowUnauthenticated=true -o Apt::Get::Download-Only=true -o 
Apt::Install-Recommends=false -o 
Dir=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/ -o 
Dir::Etc=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/etc/apt/ -o 
Dir::Etc::SourceList=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/etc/apt/sources.list.d/multistrap.sources.list -o 
Dir::State=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/var/lib/apt/ -o 
Dir::State::Status=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/var/lib/dpkg/status -o 
Dir::Cache=/opt/balloon/build/rootfs/emdebian/emdebian-grip-rootfs/var/cache/apt/ 
install apt balloon3-config base-files base-passwd bash bsdutils coreutils 
debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs 
emdebian-archive-keyring findutils gcc-4.3-base grep grip-config gzip 
hostname initscripts iputils-ping libacl1 libattr1 libblkid1 libc6 libcap1 
libcomerr2 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 
libpam-modules libpam-runtime libpam0g libselinux1 libsepol1 libslang2 libss2 
libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl 
libuuid1 libvolume-id0 login lsb-base makedev mawk mktemp mount ncurses-base 
ncurses-bin ntpdate passwd pcmciautils perl-base procps sed sysv-rc sysvinit 
sysvinit-utils tar tzdata udev util-linux zlib1g
Reading package lists... Done
Building dependency tree... Done
E: Couldn't find package pcmciautils
apt download failed. Exit value: 100
make[2]: *** [../../../build/rootfs/emdebianrootstrap.tgz] Error 100
make[2]: Leaving directory `/opt/balloon/trunk/rootfs/emdebian'
make[1]: *** [all] Error 1
make[1]: Leaving directory `/opt/balloon/trunk/rootfs'
make: *** [all] Error 1
charles@qcore:/opt/balloon/trunk$