Hi guys,
I just follow this command to mount yaffs img to a flash, but i just see lost+found directory. Can anyone see whats wrong with it? Thank you,
Setup environment
1 . Install mtd tools
sudo apt-get install mtd-utils
2. Install “git” tool for download
sudo apt-get install git-core
3. Download newest yaffs2 filesystem code
sudo git clone git://
www.aleph1.co.uk/yaffs2
Config yaffs2 filesystem
1. Generate yaffs.ko
cd xxx/yaffs2
cp ./ yportenv_multi.h ./yportenv.h
sudo make modules
These commands will generate yaffs2multi.ko
2. Insmod needed ko files
sudo modprobe mtd
sudo modprobe mtdchar
sudo modprobe mtdblock
cd xxx/yaffs2
insmod ./yaffs2multi.ko
Then, use “cat /proc/filesystem “, you will see that “yaffs2” file system is listed in the supported filesystem.
3. Use nandsim to generate a simulated nand flash device
sudo modprobe nandsim first_id_byte=0x20 second_id_byte=0xa2 third_id_byte=0x00 fourth_id_byte=0x15
Generate a yaffs2image using mkyaffs2image
1. Create rootfs
Create “rootfs” dir anywhere, and add bin/, etc/, lib/, root/, tmp/ subdirectory, “hello.txt” file.
2. Generate
xxx/mkyaffs2image xxx/rootfs rootfs.image
The rootfs.image is needed to write to nand flash.
Mount yaffs2 image to nand flash
1. Erase flash
sudo flash_eraseall /dev/mtd0
2. Write image to flash
nandwrite -a -o /dev/mtd0 rootfs.image
3. Mount
Create xxx/yaffs2_mount
mount -t yaffs2 /dev/mtdblock0 xxx/yaffs2
cd xxx/yaffs2
You will see bin/, etc/, lib/, root/, tmp, and hello.txt, which are created when generating yaffs2 image file.
(text/plain)