>Using a PSU I borrowed from Wookey, and I presume that should be Ok. It
>doesn't state its max current output on the supply.
>Since it boots Ok with a different boot loader, is it OK to presume
that
>the powersupply is good?
No, it's the transient performance that distinguishes between good and
bad PSU's.
>Standard build AFAIK, didn't have a CF card in when it played up. I did
>have a CF card in at one point whilst it was working, but owing to me
>not knowing the root password of the disto (rootme), I didn't get to
see
>if it would mount ok.
>There are two MAX604s on the board next ot the USB Connectors.
This would imply that it is not a standard Guralp build. (Wookey?)
And that you should be running it from 5v however *don't* try this till
Aleph can confirm whats been put on this board.
One extra question what, apart from connectors, is fitted to the back of
the board?
David.
iTechnic Ltd.