RE: [Balloon] SOCKET LPE network Card Setup?

> OK, I'm confused, I need more info.
> When I run depmod I get the following:
>
> /etc/init.d # depmod
> depmod:
> /lib/modules/2.4.19-rmk4-tcl2-b1-james/modules.ieee1394map is not an
> ELF file
> depmod: error reading ELF
> header /lib/modules/2.4.19-rmk4-tcl2-b1-james/modules.pnpbiosmap: No suchy
>
> Does ipkg install the modules into yaffs? Previously, I don't
> remember getting
> the above error.
It is normal to install the modules into /lib/modules/<kernel-name>/
You have a kernel called 2.4.19-rmk4-tcl2-b1-james. I created the kernel up the tcl2 bit. The other authors need to comment on their bits.

What ipkg source feed are you using?
If you are trying to install my 2.4.25 kernel modules into a 2.4.19 kernel machine then it certainly won't work.

>
> OK, so I think the modules are installed, so I wanted to start
> the CF services
> so the usual command:
> /etc/init.d # /etc/init.d/pcmcia start
> show me:
> /etc/init.d/pcmcia: No such file or directory
> /etc/init.d #
> so what installs the pcmcia directory?
>
The pcmic-cs package supplies this.

>
> Can you give me a step by step procedure of the Socket LPE
> install with a bare
> board, and show me how to get the network up?
> --Glen
>
I guess I need to know how you are trying to install onto balloon first. Are you using the serial port? Are you using usbnet? Where are you getting the ipkgs from?

Nick