[Balloon] Re: Balloon 3 Samtec pinout - first proposal

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: Wookey
Date:  
To: balloon@balloonboard.org
Subject: [Balloon] Re: Balloon 3 Samtec pinout - first proposal
+++ Chris Jones [05-06-22 11:13 +0100]:

-------forwarded mail from James McKenzie-------------
>
> Steve Wiseman wrote:
> >>The changes from Balloon 2 are:
> >>- VDD_3V is now VDD_IO (still a 3.3V supply)
> >>- VDD_5V is now VDD_RAW (which is 'rough' 5V)
> >
> >Well, sort of. If you feed 5V in, it'll be 5V... If you strap it to a
> >lithium cell, it won't be.
> >Bear in mind that these pins could as easily be used to feed power into
> >the balloon, as to feed power from the Balloon to the other board -
> >depends if you see the board as a backplane or an expansion card, really.
>
> Yes, agreed.

Umm we use VDD_3V to feed the power in, will this still
work or is VDD_IO some other supply we make all
connections to the board though the connector ?

> >We don't need nSDCAS<0..3> (pins 1, 3, 5, 7)
> >They make no sense on the backplane. (rummage. They should be DQM<0..3>)
> SDRAM-related signals, but NCAS0/1/3 don't feature on the (slightly
> ambiguous) list of things that Guralp definitely aren't using, so I
> didn't meddle with them. It's hard to see what they'd be using them for,
> anyway.
>
> DQM3..0 would be much more useful, I agree. Can anyone from Guralp
> (James McKenzie?) comment?


sorry pins 1,3,5,7 ARE DQM0-3 are they not?

We pass these through to a h3800 connector and are used by
something which I don't think we'll be making any more of.

HOWEVER if you drop these - then you commit yourself to
using only 8 or 16 bit IO. You won't be able to drive a
chip like the smc lan91c96 in 16 bit mode.

>
> >>- MBREQ/DREQ<0> and MBGNT/DVAL<0> are present on the Samtec so
> >>motherboard devices can do bus mastering and DMA
> >
> >I guess I ought to pull these to a safe state on Balloon :)
>
> I'm sure we'll be discovering myriads of things like that...
>

Sorry are these in or out?

James.




====================================================
The information in this email and in any attachments is confidential
and intended solely for the attention and use of the named addressee(s).
This information may be protected by work product immunity or other
legal rules. It must not be disclosed to any person without our
authority.
If you are not the intended recipient, or a person responsible for
delivering it to the intended recipient, you are not authorised to and
must not disclose, copy, distribute, or retain this message or any part
of it.
---------end forwarded mail----------

Wookey
-- 
Aleph One Ltd, Bottisham, CAMBRIDGE, CB5 9BA, UK  Tel +44 (0) 1223 811679
work: http://www.aleph1.co.uk/     play: http://www.chaos.org.uk/~wookey/