30/11/2004 17:17:04, Glen VanMilligan <
glenv@vpcvalley.com>
wrote:
>What is the procedure for setting up the Socket LPE network
card?
>What network drivers are used?
Someone else will answer this, I suspect.
>Is the CF card hot swappable?
No, Certainly not if you're using the expansion bus for anything
else. If the CF is the only thing on the expansion bus, then the
hardware should be able to support hot-swap, but it certainly
wasn't the intended mode. Boot with what you want to run...
(Balloon3 may support hot-swap, but it's not a strong
requirement)
Steve
(text/plain)